Selected for you
 
NanoPC-T2 - Quad-core, 1GB DDR3, 8 GB eMMC, WiFi, BLE 4.0


FriendlyARM NanoPC-T1 board powered by Samsung Exynos 4412 processor with 1GB RAM and 4GB eMMC flash was unveiled at the start of 2014 for $69. The company has now announced NanoPC-T2 with Samsung S5P4418 processor with 1GB RAM, and 8GB Flash, as well as WiFi and Bluetooth, as Gigabit Ethernet all of which were missing in the first version. NanoPC-T2 also has a power management chip, and a larger heatsink, meaning that it does not suffer from overheating like NanoPi2 according to FriendlyARM.

NanoPC-T2 specifications:
SoC ? Samsung S5P4418 quad core Cortex A9 processor @ up to 1.4GHz with Mali-400MP GPU
System Memory ? 1GB 32bit DDR3 RAM
Storage ? 8GB eMMC flash, and 1x SD card slot (on the bottom of the board)
Connectivity ? Gigabit Ethernet, 802.11 b/g/n WiFi and Bluetooth LE 4.0 (Ampak AP6212) with on-board chip antenna and 1x IPX antenna connector
Video Output / Display I/F- 1x HDMI 1.4a, LVDS, MIPI DSI, 0.5 mm pitch SMT FPC seat for type-A full-color LCD (RGB: 8-8-8)
Audio I/O ? HDMI, 3.5mm audio jack, 1x on-board microphone
Camera ? 1x DVP interface, 1x MIPI CSI interface
USB ? 2x USB 2.0 type A host ports; 1x micro USB 2.0 OTG port; 2x USB 2.0 host port via 8-pin header
Expansions Headers ? 30-pin header for GPIO, 8-pin header for power signals, reset and LED 1-2
Debugging ? 4-pin header for serial console
Misc ? Power switch, 1x power & 2x user LEDs, RTC battery header, boot selection button (SD card / eMMC)
Power Supply ? 5V/2A via power barrel; AXP228 PMIC
Dimension ? 100 x 60 mm (6-layer PCB)

Read more: http://www.cnx-software.com/2016/02/04/friendlyarm-nanopc-t2-board-gets-more-storage-wifi-bluetooth-stays-cool-and-costs-less/