FriendlyARM released a new member to NanoPC family. NanoPC-T3.
So much power for $75 (without shipping).
Specification:
SoC: Samsung S5P6818 Octa-Core Cortex-A53, 400M Hz - 1.4G Hz
PMU Power Management: Implemented by a Cortex-M0 MCU, support software power-off, sleep and wakeup functions
System Memory: 2GB 32bit DDR3 RAM
SD Storage: 1 x microSD Card Socket
Ethernet: Gbit Ethernet(RTL8211E)
WiFi: 802.11b/g/n
Bluetooth: 4.0 dual mode
Antenna: Porcelain Antenna IPX Interface eMMC: 16GB
Video Input: DVP Camera/MIPI-CSI (two camera interfaces)
Video Output: HDMI Type-A / LVDS / Parallel RGB-LCD / MIPI-DSI (four video output interfaces)
Audio: 3.5 mm audio jack / via HDMI
Microphone: onboard Microphone
USB Host: 4 x USB 2.0 Host, three type A ports and one 2.54 mm pitch pin-headers
MicroUSB: 1 x MicroUSB 2.0 Client, Type A
LCD Interface: 0.5mm pitch 45 pin FPC seat, full color RGB 8-8-8
HDMI: 1.4A Type A, 1080P
DVP Camera: 0.5mm pitch 24 pin FPC seat
GPIO: 2.54 mm pitch 30 pin-header
I2S/USB: 2.54 mm pitch 14 pin-header
Serial Debug Port: 2.54mm pitch 4-pin-header
User Key: power, Reset, boot selection
LED: 1 x power LED and 1 x system LED
Other Resources: CPU?s internal TMU
RTC Battery: RTC Battery Seat
Heat Sink: 1 x Heat Sink with mounting holes
Power: DC 5V/3A
PCB: Six Layer
Dimension: 100 mm x 64 mm
Working Temperature: -40? to 80?
OS/Software: uboot, Android and Debian