Selected for you
 


Bold statement, right? Apacer offers two series of industrial DRAM modules that use fully-tested world-class chips, providing full technical support with 3years warranty but also a fixed BOM and other benefits.
Whole article is available on https://time4ee.com/articles.php?article_id=99

Source of article: https://www.soselectronic.com
 


BigClown, the IoT platform which is focused on lowpower application, released an updated Core module which is the main module for every your project. ...
 


Flir is a brand of quality in the production and development of thermal cameras. See the list of the latest news in electronics’ thermography.
Whole article is available on https://time4ee.com/articles.php?article_id=98

Source of article: https://www.soselectronic.com/
 
You know, you designed your own PCB for you project and want to fabricate that. Some makers own tools which are needed for manufacturing of PCB, other makers use PCB manufacturers.
This news introduces one of them - PCBgogo....
 


The development board with STM32F030 microcontroller costs a few bucks.
Do you know how to program that? If not, check this article.
You will discover how to program the STM32F030F4P6 minimum system development board.
Whole article is available on https://time4ee.com/articles.php?article_id=101
 


The TEQ 300WIR meets the demanding requirements for quality, reliability and safety for use in railway applications. The TRACO Power converters of this series contribute to the creation of simple and reliable solutions.
Whole article is available on https://time4ee.com/articles.php?article_id=97

Source of article: https://www.soselectronic.com/
 


This news shows really detailed tutorial how to create robot which is based on Arduino platform.
This tutorial is step-by-step tutorial which describes you what components use, how to connect all components and how to write and upload code to Arduino.
You also find there how to make remote control and highlight posibility issues during the bulding of robot.

Homepage of project: https://blog.miguelgrinberg.com/post/building-an-arduino-robot-part-i-hardware-components
 
Eagle CAD, the CAD for design of PCB, was released in a new version - 9.1.0.
This release brings a lot of features.

All features you find here:

https://forums.autodesk.com/t5/eagle-forum/eagle-version-9-1-45-90-degree-drag-single-click-wiring-much/td-p/8101873
 


Build your own IoT gateway for your sensors and also you can join to The Things Network, community IoT network. This tutorial describes the using of OrangePi Zero and IoT transceiver RAK831 module.

Miroslav Prymek shared success with OrangePi Zero and RAK831 on google plus. He built own gateway and joined to IoT network called The Thing Networks (TTN). ...
 


Crowdfunding campaign for LoRa Stik is available on Crowdsupply website. The LoRa Stik is interface for connecting of your devices to Internet of Things. The IoT device contains USB connector so you can esaily connect your laptop, RaspberryPi, OrangePi or BananaPi to IoT and send your needed data. ...
 


Insert SODIMM RAM module into socket, connect SSD and fasten it to CPU BOX kit. Connect 3 cables from the LCD kit to CPU BOX kit, click CPU BOX kit into LCD kit and fix 3 screws - done. You can build panel PC yourself or buy pre-assembled one.
Whole article is available on https://time4ee.com/articles.php?article_id=96

Source of article: https://www.soselectronic.com/
 


WIZnet has just launched a new W7500 & W7500P-based Serial to Ethernet modules (S2E modules), which are pin-to-pin compatible with WIZnet’s existing S2E modules – WIZ1XX series.
Whole article is available on https://time4ee.com/articles.php?article_id=95

Source of article: https://www.soselectronic.com
 


Swiss company Schurter offers EMC filters, common mode chokes, as well as filters integrated with inlet, switch and fuse. Typical EMC filter contains common mode choke and X and Y class capacitors. But how does it work?
Whole article is available on https://time4ee.com/articles.php?article_id=94

Source of article: soselectronic.com
 


Summer holiday is comming and maybe you are looking for some interesting project which will be helpful for your development.
Active electronic load is very good project which you can use everytime during you development of power supply or regulator....
 


Green, grey, black, blue, red, yellow and orange - using Euroclamp coloured terminal blocks radically reduces the possibility of incorrect connecting of the cables.
Whole article is available on https://time4ee.com/articles.php?article_id=93

Source of article: https://www.soselectronic.com/
 


Xunlong company released a new development board with 3G connectivity in two variants. You can also buy 2G (Orange Pi 2G-IoT) and 4G (Orange Pi 4G-IoT) which Xunlong already released.
Now, here are two variants of OrangePi 3G-IoT board - A (19.90 USD) and B (24.90 USD)...
 


Sony released the specification of very powerful development board with Arduino Uno connectors and support in Arduino IDE. ...
 
This is a cooperative scheduler for running multiple tasks on Arduino. The tasks are called automatically at specified times for specified number of times. This frees your program from timing logic and makes your Arduino look like it's doing several things at once.
 


Sensirion SCD30 is a calibrated module with NDIR CO2, humidity and temperature sensors. Measuring of CO2 concentration and automatic ventilation on demand guarantees healthy workplace and even saves the energy.
Whole article is available on https://time4ee.com/articles.php?article_id=92

Source of article: https://www.soselectronic.com/
 


The popular czech IoT platform called BigClown released a new sensor (TAG). TAG called VOC (Volatile Organic Compounds), it is a new TAG, now you can buy also humidity, temperature, light intensity and NFC. ...